TinyOhms
Adhish Technologies
No ratings yetEducationAges 4+
Screenshots
About this app
TinyOhms opens straight onto a breadboard. Drop in a battery, a resistor and an LED, and the circuit runs the moment the loop closes. Current flows along the wires as moving chevrons, the LED glows brighter or dimmer with the real numbers, and if you push too much current through it, it pops. Nothing to install, nothing to solder, nothing to break. REAL PARTS, REAL MATH Every component behaves like the one in the drawer: resistors follow Ohm's law, LEDs have a forward voltage, transistors amplify, capacitors charge and drain, and the 555 timer ticks at the frequency its resistors and capacitor set. Under the hood is a full circuit solver (the same kind of nodal analysis SPICE uses), so the readouts are the ones you would measure with a meter. SEE WHAT IS HAPPENING • Live current flow on every wire, with direction and strength • Inspect mode: tap the eye to read every node voltage and branch current • A built-in scope that traces voltages over time — watch a capacitor charge, or a 555 output square wave • Real sound: buzzers beep and piezo speakers play the pitch the circuit sets • Room-light and temperature sliders to drive light sensors and thermistors • Short-circuit and overload warnings before anything "burns" BUILT FOR LEARNING TinyOhms is made for teens and any complete beginner. There is no lesson to sit through: build, watch, change one thing, and see what happens. Twenty ready circuits take you from a single LED to a light-following night light, a blinking timer, a one-shot pulse, a pitch control you can hear, and a traffic-light sequencer built from a 555 and a 4017 counter. YOUR OWN LIBRARY Sign in with just your email (a code, no password) to save circuits to your library and open them on the TinyOhms website Workbench too. Export any board as a SPICE netlist or share the board file. ON THE BENCH Free: wire, jumper, batteries (3 V, 4.5 V, 9 V), resistor, LED, switch, push button, buzzer, light sensor (LDR) and NPN transistor — everything the beginner projects need. TinyOhms Pro (optional monthly subscription): potentiometer, capacitor, 1N4001 diode, DC motor, thermistor, piezo speaker, the 555 timer and the CD4017 counter. Circuits from the library always open in full, whether or not you subscribe. TinyOhms Pro renews monthly until cancelled in Settings › Apple Account › Subscriptions. Under 18? Ask a parent first. Terms: https://tinyohms.com/terms/ Privacy: https://tinyohms.com/privacy/
What's new
Version 5.0.0 · Oct 25, 2026
• Three new parts: a 3.3 V zener diode, a 2N7000 MOSFET and the CD4011 NAND chip, each with its own circuit to build. • Try this: every library circuit now has one-tap variants. Open the menu under the status line and watch the board act them out. • Search the circuit library. • Now on Android too, with the same parts, circuits and library as iPhone.
In-app purchases
The most popular purchases on the App Store.
- com.tinyohms.app.pro.monthlySubscription$69.00 / month
More from Adhish Technologies
Sweet'N'Spicy - Indian RecipesAdhish Technologies
Dr. Notes - Clinical AssistantAdhish Technologies
MedXcribeAdhish Technologies
TinyClimbs Play & LearnAdhish Technologies
GrowPls: Plant Care & AIAdhish Technologies
Dr. Notes for PsychiatristsAdhish Technologies
TinyClimbs: Worksheet MakerAdhish Technologies
MedXChat - Talk To DocsAdhish Technologies
You might also like
Simulador Digital bitGateLabRUBEN ESTRADA MARMOLEJO
Singular: Circuit SimulatorAli Mert TUFEKCI
Ohmira: Simulador CircuitosMewey
UCircuitKRASMIROV KANEV
CircuitopiaCrankk Inc
Perfboard LabPascal Schroeer
Electronics+Forwa Elade Wunde
Electro Sim剑龙 刘
Cirquanta: Simulador lógicoMewey
Electrónica & ArduinoMEHMET CANKER (TR)